STUDY OF AN IMPROVED VENTILATION TUNNEL FORMING DEVICE FOR COTTON STACKS

Authors

  • Rakhmonov Azizbek Asqarali o‘g‘li Rakhmonov Azizbek Asqarali o‘g‘li Author
  • Ruzmetov Mansurbek Erkinovich Ruzmetov Mansurbek Erkinovich Author
  • Tuychiyev Timur Ortiqovich Tuychiyev Timur Ortiqovich Author

Keywords:

cotton, riot, tunnel former, plastic deformation, mechanization, ventilation tunnel.

Abstract

This paper examines the design improvement, optimal geometric parameters, and operating modes of a mobile tunnel-forming device designed to form a ventilation tunnel in cotton bales. During the experiments, changes in the height and width of the device, the vertical component of plastic deformation, the stability of the tunnel shape, and the forces required to extract the device from the pile were determined. Based on the obtained results, an optimal tunnel formation technology was developed and the effectiveness of the modernized device model was proven.

Author Biographies

  • Rakhmonov Azizbek Asqarali o‘g‘li, Rakhmonov Azizbek Asqarali o‘g‘li

    Doctoral candidate. Tashkent Institute of Textile and Light Industry.

  • Ruzmetov Mansurbek Erkinovich, Ruzmetov Mansurbek Erkinovich

    Associate Professor, PhD,. Tashkent Institute of Textile and Light Industry.

  • Tuychiyev Timur Ortiqovich, Tuychiyev Timur Ortiqovich

    Associate Professor, PhD,. Tashkent Institute of Textile and Light Industry.

References

Downloads

Published

2026-06-13

Issue

Vol. 7 No. 1 (2026): ADVANCES IN RESEARCH AND INNOVATION SOLUTIONS

Section

Articles